EX-222.2 Integrated amplifier 2x70W - Bluetooth

Print
The EX-222.2 delivers 2x70W RMS of power into 8 Ohms. It includes a Bluetooth receiver APT-X.

Finishes:
Description
Datasheet Manual Press

 

EX222.1

Test: EX-222.1 - PULSION AUDIO - Canadian magazine - "Best Buy 2014!" - December 2014 (french) - Download the PDF.
EX-222-1 awarded by a "CHOC" from CLASSICA magazine N°166 - October 2014
(french)
 

This amplifier was designed in an audiophile approach to ensure the high fidelity amateur a faithful reproduction of his favourite music. It delivers 2x70W RMS of power into 8 Ohms, thanks to its high-performance 2x200VA Toroidal transformers. It includes a Bluetooth APT-X interface, allowing you to play music from your Smartphones. The EX-222 comes with 6 unbalanced audio inputs, 1 digital (optical and / or coaxial) allowing  connection to latest generation TV sets. Finally, it provides a "Pre-Out" to perform bi-amplification.

 

HIGHLIGHTS
- High quality manufacturing
- Shielded preamplifier
- Dual transformer power supply
- High power output amplifier stages
- Ability to drive any kind of speakers (8, 4, 2 Ohms)

- Bluetooth APT-X
- Optical and Coaxial digital inputs
- Poweroutput for optional card (eg. the Phono card EXPHONO-2X.)
- Headphone output

 

MORE…
The Bluetooth® APT-X codec is an audio compression technology that was developed by the Irish company APT (Audio Processing Technology).

Bluetooth Aptx

This codec allows playing music tracks stored on a distant source, using a wireless Bluetooth connection between two devices, source (emitter) and destination (receiver). Compatible with A2DP Stereo Bluetooth devices, Bluetooth APT-X codec offers near CD audio quality. The 4:1 average compression ratio allows high quality listening.

The APT-X audio codec is available for high quality stereo audio over Bluetooth. When incorporated in Bluetooth A2DP Stereo products, APT-X audio coding delivers full 'wired' audio quality.  With the APT-X audio codec source material is transparently delivered over the Bluetooth link, whether it is stored uncompressed or in an alternative compression (MP3, AAC, FLAC) formats.

MP3 or AAC files with a throughput less than 350 Kbits / sec are transmitted without transcoding or any loss of data. The dynamic range reaches 92 dB, for 16-bit resolution and 20 Hz to 22 kHz frequency response (such as CD-Audio). Moreover, the Bluetooth APT-X codec is compatible with Bluetooth conventional SBC systems.

The EX-222 Bluetooth® works with computers, smartphones, and tablets.

 

The EX-222 is dual power supply equipped, using two 200 VA Toroidal transformers. The amplifier stages share the same structure with famous EX-302, but with a doubled capacitive decoupling and a higher voltage level for final stages.

The EX-222 power stage units were designed for the most demanding speakers at very high power levels.

A power output is available at the rear of the unit for the optional board. So you can, for example, add the Phono cart EX-PHONO-2X without having to worry about how to power it.

 

SPECIFICATIONS
2x 70W RMS power into 8 ohms & 2x 120W into 4 ohms
Total Harmonic Distortion <0.01%
Signal to Noise ratio> 100 dBA
Bandwidth: 15Hz-25 kHz (0.5 dB)


Connectors
4x RCA line inputs: LINE 1 to LINE 4
1x Digital Input: Optical and Coaxial
2x RCA line outputs: Pre-Out
1x Pair of isolated speakers terminals
1x Headphone jack 6.35 mm in front
1x Power output foroptional card(Type2X)
1x Detachable IEC power socket
Remote control

Dimensions (WxHxD): 430x80x340 mm
Weight: 8.3 kg

Finishes:

 

 

Comparative table

Comparison table of EX Series amplifiers

th this summary table, you can quickly compare important features of the EX Series amplifiers.To deepen your selection, please refer to the specific product data sheets for each model.

Comparative table
EX222-2-01-Front-web1000x1000
EX222-2-03-Angle-web1000x1000
EX222-2-02-Rear-web1000x1000
EX222-2-04-Antenne-BT-web1000x1000
EX222-2-05-Inside-web1000x1000
RC-EX1-1-Telecommande-Image1-web1000x100090